Stored Seed Temperatures and Plantibility

Best practices to improve seed flow and singulation

Several factors, such as air and seed temperature, relative humidity, seed treatment recipe, as well as seed size and shape impact seed flow and plantability.

Three key management strategies for successful seed flow and singulation.

Excellent planting accuracy and plant stand establishment can be achieved with all seed sizes and shapes, regardless of seed treatment recipe and environmental conditions, through careful planter aid usage and planter adjustments.

This article highlights environmental conditions that result in challenging planting conditions, as well as best practices to optimize planting accuracy.

The challenge: Spring weather is unpredictable

Warming spring temperatures signal the beginning of the crop planting season. However, weather in spring is unpredictable with cold, dry conditions often followed closely by warm, humid conditions. Rapid fluctuations in weather can create condensation on the seed, causing poor seed flow, increased seed bridging and reduced planter accuracy.

While all LumiGEN® treated seeds leave the production plant dry, when the dew point outside is above the temperature of the seed (i.e., when it is removed from cold storage into warmer, humid conditions), condensation will start to occur.

An example from the graph below, when seed is stored at 50°F, condensation can start to occur as soon as the seed is moved into warmer, more humid conditions common during the spring planting season. When condensation accumulates on seed, planting accuracy can be impacted if not managed properly.

The opportunity: Be prepared for Spring Weather

1. Planter aids: Diligently and thoroughly apply planter aids as recommended by your planter manufacturer. Data has shown that priming the planter unit with graphite or a talc/graphite blend, as well as mixing the planter aid properly with the seed, can greatly improve seed flow and singulation (see details below).
   a. Talc: A naturally occurring mineral that acts as a drying agent, while reducing static electricity.
   b. Graphite: A crystalline carbon lubricant that helps reduce equipment wear, improves seed flow and reduces static electricity. Not a drying agent.
   c. Fluency Agent: A polyethylene wax-based lubricant used to aid seed flow. Not a drying agent.
2. Contact your local Dairyland Seed sales representative for precise recommendations on planter settings, and access batch-specific information for individual planters. Adjust settings to planting conditions following manufacturer instructions. You can also access the following website for planter settings https://plantability.pagcat.com/. This is located on the Dairyland Seed website under “MYDS”. Scroll to the bottom of the page to find the “Dairyland Seed Plantability” option.
3. Environment: Slowly increase seed storage temperature and provide increased air flow to minimize seed condensation. When using boxes or large pallets of seed bags, warming the seed should be done over numerous days (ideally, 1-2 weeks) if feasible.

For more details, click here.

Brian Weller
Western Region
507.456.3034

Rod Moran
Western Region
507.456.3034

Dan Ritter
Central Region
219.863.0583

Branden Furseth
Northern Region
608.513.4265

Mark Gibson
Eastern Region
260.330.8968

Amanda Goffnett
Eastern Region
989.400.3793

Ryan Mueller
Eastern Region
989.400.3793

Enjoying our Agronomy Updates? Suggestions for topics you'd like us to weigh in on? Drop us an email at dairylandseed@dairylandseed.com. We'd love to hear from you!